What does a walk-in shower cost in Bristol?
Our guide range in Bristol is £2,600–£6,100 including VAT.
Tray and screen
- Low-profile tray and 8 mm glass panel
Frameless upgrade
- Concealed thermostatic valve
Tiled level floor
- Floor and wall tiling
Guide prices for Bristol including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Bristol?
Water across much of Bristol is hard. If your supply in Bishopsworth is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Bishopsworth shower enclosure has a leaking door seal or a cracked tray, a walk-in panel removes the door altogether.
What the job includes
- Removal of the old bath or enclosure and making good to the walls and floor
- A survey of the space, the waste position, water pressure and the hot-water system
- A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
- An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing
- A thermostatic valve with a riser rail, a fixed head or both
- Silicone, a full-flow test for leaks and spray, and handover
Decisions to make first
Head
A large overhead head feels luxurious but needs good flow. A handset on a riser is easier for rinsing hair and cleaning the shower.
Tray length
Go long rather than wide. A 1400 to 1700 mm tray with a 900 to 1200 mm panel leaves a dry walkway; a 1200 mm tray works but gives less margin for spray.
Glass thickness
8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.
Tray or tiled floor
A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.
Rules that apply in England
Fitting a walk-in shower does not need planning permission. The light and fan above the shower are in zone 1 up to 2.25 m and must be at least IPX4, or IPX5 where water jets are used, with 30 mA RCD protection on every circuit under BS 7671. Under the water fittings rules, a shower pump may only be used on a gravity system with a cold tank, never on the mains, and the shower needs protection against water flowing back into the supply.
In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.