What does a walk-in shower cost in Cambridgeshire?
Our guide range in Cambridgeshire is £2,600–£6,400 including VAT. Prices in Cambridgeshire run at about 6% above the UK guide, based on East of England labour rates.
Tray and screen
- Thermostatic mixer and riser rail
Frameless upgrade
- Large-format tiles, niche
Tiled level floor
- Floor former, tanking and linear drain
Guide prices for Cambridgeshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Cambridgeshire?
Water across much of Cambridgeshire is very hard. If your supply in Peterborough is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are planning ahead in Peterborough for easier access, a low-profile walk-in tray gives most of the benefit without a full wet room.
What the job includes
- Wall tiling, with an optional recessed niche
- Tanking to the shower walls, and to the floor where it is tiled
- An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing
- A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
- Removal of the old bath or enclosure and making good to the walls and floor
- A survey of the space, the waste position, water pressure and the hot-water system
Decisions to make first
Glass thickness
8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.
Niche
A recessed shelf in the back wall keeps bottles off the tray. It has to be planned at first fix and tanked like the rest of the wall.
Tray or tiled floor
A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.
Head
A large overhead head feels luxurious but needs good flow. A handset on a riser is easier for rinsing hair and cleaning the shower.
Rules that apply in England
Fitting a walk-in shower does not need planning permission. The light and fan above the shower are in zone 1 up to 2.25 m and must be at least IPX4, or IPX5 where water jets are used, with 30 mA RCD protection on every circuit under BS 7671. Under the water fittings rules, a shower pump may only be used on a gravity system with a cold tank, never on the mains, and the shower needs protection against water flowing back into the supply.
In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.