What does a walk-in shower cost in County Fermanagh?
Our guide range in County Fermanagh is £2,200–£5,300 including VAT. Prices in County Fermanagh run at about 12% below the UK guide, based on Northern Ireland labour rates.
Tray and screen
- Tiling to the shower walls
Frameless upgrade
- Large tray and frameless screen
Tiled level floor
- Level threshold
Guide prices for County Fermanagh including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Fermanagh?
Most of County Fermanagh is supplied with soft water. If that holds for your street in Enniskillen, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. We measure walk-in showers in Enniskillen so the tray and panel are sized together, which is what keeps the spray in.
What the job includes
- Tanking to the shower walls, and to the floor where it is tiled
- Wall tiling, with an optional recessed niche
- Silicone, a full-flow test for leaks and spray, and handover
- A thermostatic valve with a riser rail, a fixed head or both
- A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
- An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing
Decisions to make first
Tray or tiled floor
A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.
Valve
An exposed bar valve with a riser rail is easy to fit and service. A concealed valve hides the pipework and suits a fixed overhead head.
Head
A large overhead head feels luxurious but needs good flow. A handset on a riser is easier for rinsing hair and cleaning the shower.
Tray length
Go long rather than wide. A 1400 to 1700 mm tray with a 900 to 1200 mm panel leaves a dry walkway; a 1200 mm tray works but gives less margin for spray.
Rules that apply in Northern Ireland
Fitting a walk-in shower does not need planning permission. The light and fan above the shower are in zone 1 up to 2.25 m and must be at least IPX4, or IPX5 where water jets are used, with 30 mA RCD protection on every circuit under BS 7671. Under the water fittings rules, a shower pump may only be used on a gravity system with a cold tank, never on the mains, and the shower needs protection against water flowing back into the supply.
In Northern Ireland, building control is only involved where drainage, structure or ventilation change. New fittings must meet the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009.