- Postcode districts
- NG17, NG18
- Nearby
- Sutton in Ashfield, Mansfield and Hucknall
- Guide price
- £2,400–£5,800
- Typical time on site
- 2–5 working days
- Water
- Hard across most of Nottinghamshire
- Survey
- Free, at your home
What does a walk-in shower cost in Kirkby in Ashfield?
As a guide, budget £2,400 to £5,800 including VAT for a walk-in shower in Kirkby in Ashfield; your written quote will pin it down. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Tray and screen
- Thermostatic mixer and riser rail
Frameless upgrade
- Large-format tiles, niche
Tiled level floor
- Floor former, tanking and linear drain
Guide prices for Kirkby in Ashfield including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Kirkby in Ashfield
As well as Kirkby in Ashfield itself (NG17 and NG18), we survey in Sutton in Ashfield, Mansfield and Hucknall.
In Kirkby in Ashfield, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are planning ahead in Kirkby in Ashfield for easier access, a low-profile walk-in tray gives most of the benefit without a full wet room. If your Kirkby in Ashfield shower enclosure has a leaking door seal or a cracked tray, a walk-in panel removes the door altogether.
Supplies across most of Nottinghamshire are hard. If your supply in Kirkby in Ashfield is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A thermostatic valve with a riser rail, a fixed head or both
- A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
- An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing
- Tanking to the shower walls, and to the floor where it is tiled
Decisions to make first
Glass thickness
8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.
Tray length
Go long rather than wide. A 1400 to 1700 mm tray with a 900 to 1200 mm panel leaves a dry walkway; a 1200 mm tray works but gives less margin for spray.
Rules that apply in England
In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.
