What does a walk-in shower cost in Shropshire?
Our guide range in Shropshire is £2,400–£5,900 including VAT.
Tray and screen
- Thermostatic mixer and riser rail
Frameless upgrade
- Large-format tiles, niche
Tiled level floor
- Floor former, tanking and linear drain
Guide prices for Shropshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Shropshire?
Most of Shropshire has moderately hard water. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Telford. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are planning ahead in Telford for easier access, a low-profile walk-in tray gives most of the benefit without a full wet room.
What the job includes
- Wall tiling, with an optional recessed niche
- Silicone, a full-flow test for leaks and spray, and handover
- A survey of the space, the waste position, water pressure and the hot-water system
- An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing
- Removal of the old bath or enclosure and making good to the walls and floor
- A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
Decisions to make first
Valve
An exposed bar valve with a riser rail is easy to fit and service. A concealed valve hides the pipework and suits a fixed overhead head.
Niche
A recessed shelf in the back wall keeps bottles off the tray. It has to be planned at first fix and tanked like the rest of the wall.
Glass thickness
8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.
Tray or tiled floor
A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.
Rules that apply in England
Fitting a walk-in shower does not need planning permission. The light and fan above the shower are in zone 1 up to 2.25 m and must be at least IPX4, or IPX5 where water jets are used, with 30 mA RCD protection on every circuit under BS 7671. Under the water fittings rules, a shower pump may only be used on a gravity system with a cold tank, never on the mains, and the shower needs protection against water flowing back into the supply.
In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.