What does a wet room cost in County Tyrone?
Our guide range in County Tyrone is £5,300–£10,500 including VAT. Prices in County Tyrone run at about 12% below the UK guide, based on Northern Ireland labour rates.
Compact
- Under about 4 m²
Signature
- Frameless screen, thermostatic shower
Large or luxury
- Concealed valves, feature lighting
Guide prices for County Tyrone including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Tyrone?
Most of County Tyrone is supplied with soft water. If that holds for your street in Omagh, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Omagh bathroom is upstairs on timber joists, we check their size and direction before planning the wet room floor.
What the job includes
- Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
- Slip-resistant porcelain floor tiles and wall tiling
- Floor strengthening or a ply overlay on timber floors so the surface does not flex
- A pre-formed floor former with a linear or centre drain, or a screed laid to fall
- A frameless glass screen fixed to the wall and floor
- A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Decisions to make first
Former or screed
A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.
Screen size
A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.
Open or screened
A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.
Floor tile
Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.
Rules that apply in Northern Ireland
A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.
In Northern Ireland, building control covers new drainage, ventilation and structural changes to the floor. There is no Part P, but the electrics should be tested and certified to BS 7671.

