Wet rooms in Bexhill-on-Sea

Postcode districts: TN38, TN39, TN40
Nearby: Hastings, Hailsham and Eastbourne
Guide price: £6,700–£13,500
Typical time on site: 5–10 working days
Water: Hard across most of East Sussex
Survey: Free, at your home

What does a wet room cost in Bexhill-on-Sea?

In Bexhill-on-Sea, a wet room typically costs £6,700–£13,500 including VAT, based on South East England prices. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Compact

£5,000–£7,800

Full tanking, porcelain tiles

Typical

Signature

£7,800–£13,500

4–7 m² room

Large or luxury

£13,500–£20,250

Large-format or stone-effect tiles

Guide prices for Bexhill-on-Sea including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Bexhill-on-Sea

We work right across Bexhill-on-Sea — TN38, TN39 and TN40 — and in neighbouring Hastings and Hailsham.

Homes in and around Bexhill-on-Sea vary, so we look at the floor, the walls and the water system before we price anything. If your Bexhill-on-Sea home has a concrete ground floor, a downstairs wet room may need the screed cut out to set the drain. For a wet room in a Bexhill-on-Sea flat, the first step is the lease, because freeholder consent is often needed before any work starts.

Supplies across most of East Sussex are hard. If your supply in Bexhill-on-Sea is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
A pre-formed floor former with a linear or centre drain, or a screed laid to fall
Strip-out, waste removal, a final flow test to the drain and handover
Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection

Decisions to make first

Linear or centre drain

A linear drain along one wall lets the floor fall in a single direction, so large tiles can be laid without awkward cuts. A centre drain needs a four-way fall and suits smaller tiles or mosaic.

Underfloor heating

Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.

Rules that apply in England

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

More about wet rooms

Wet rooms in Bexhill-on-Sea: questions

How much should I budget for a wet room in Bexhill-on-Sea?

A wet room in Bexhill-on-Sea usually costs £6,700–£13,500 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Who handles building control for a wet room in Bexhill-on-Sea?

Building control for Bexhill-on-Sea is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a wet room take?

Allow 5–10 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Bexhill-on-Sea.

Is the home survey in Bexhill-on-Sea really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do wet rooms leak?

A properly tanked wet room should not leak. When one does, the cause is usually a gap in the membrane at a corner or pipe, a poor drain connection, or a floor that flexes and splits the seal. Leaks in wet rooms are expensive to trace, which is why the floor is stiffened first and the tanking is checked before tiling.