Wet rooms in the Forth Valley

What does a wet room cost in the Forth Valley?

Our guide range in the Forth Valley is £5,800–£11,500 including VAT. Prices in the Forth Valley run at about 4% below the UK guide, based on Scotland labour rates.

Compact

£4,300–£6,700

Full tanking, porcelain tiles

Typical

Signature

£6,700–£11,500

4–7 m² room

Large or luxury

£11,500–£17,250

Large-format or stone-effect tiles

Guide prices for Forth Valley including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in the Forth Valley?

Supplies across most of the Forth Valley are soft. If that holds for your street in Stirling, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. We quote wet rooms in Stirling only after looking at the floor construction, because that is where most of the cost difference lies.

What the job includes

A frameless glass screen fixed to the wall and floor
Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
Floor strengthening or a ply overlay on timber floors so the surface does not flex
A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Strip-out, waste removal, a final flow test to the drain and handover
Slip-resistant porcelain floor tiles and wall tiling

Decisions to make first

Underfloor heating

Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.

Linear or centre drain

A linear drain along one wall lets the floor fall in a single direction, so large tiles can be laid without awkward cuts. A centre drain needs a four-way fall and suits smaller tiles or mosaic.

Former or screed

A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.

Screen size

A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.

Rules that apply in Scotland

A wet room inside an existing home does not need planning permission. In a flat, check your title deeds and any deed of conditions: agreement from the other owners or the factor is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.

In Scotland, a wet room that alters the drainage, involves structural work to the floor or forms a new bathroom may need a building warrant; a straight refit usually does not. Water fittings must meet the Scottish Water Byelaws 2014.

Wet rooms in the Forth Valley: questions

How much does a wet room cost in the Forth Valley?

A wet room in the Forth Valley typically costs £5,800–£11,500 including VAT, based on Scotland prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in the Forth Valley do you cover?

We cover the whole of Forth Valley, including Stirling, Falkirk, Alloa and Grangemouth. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a wet room take?

Most jobs take 5–10 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in the Forth Valley?

What is tanking in a wet room?

Tanking is the waterproof layer under the tiles that stops water reaching the floor and walls. It is usually a liquid or sheet membrane, with sealing tape at every corner, board joint and pipe. Tiles and grout are not waterproof on their own, so the tanking is what actually keeps the water in.