Wet rooms in Preston

Postcode districts: PR1, PR2
Nearby: Blackburn, Darwen and Poulton-le-Fylde
Guide price: £5,600–£11,250
Typical time on site: 5–10 working days
Water: Soft across most of Lancashire
Survey: Free, at your home

What does a wet room cost in Preston?

Our guide price for a wet room in Preston is £5,600–£11,250 including VAT. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Compact

£4,200–£6,600

Full tanking, porcelain tiles

Typical

Signature

£6,600–£11,250

4–7 m² room

Large or luxury

£11,250–£17,000

Large-format or stone-effect tiles

Guide prices for Preston including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Preston

In Preston we cover PR1 and PR2; we also cover Blackburn, 9.1 miles away, and Darwen.

Preston is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. We quote wet rooms in Preston only after looking at the floor construction, because that is where most of the cost difference lies. If you are planning a wet room in Preston for level access, we design the fall and drain so the floor is flush from the doorway.

Most of Lancashire is supplied with soft water. If that holds for your street in Preston, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A frameless glass screen fixed to the wall and floor
Strip-out, waste removal, a final flow test to the drain and handover
Slip-resistant porcelain floor tiles and wall tiling
A pre-formed floor former with a linear or centre drain, or a screed laid to fall

Decisions to make first

Open or screened

A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.

Underfloor heating

Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.

Rules that apply in England

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

More about wet rooms

Wet rooms in Preston: questions

What is the price of a wet room in Preston?

A wet room in Preston usually costs £5,600–£11,250 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover PR1 and PR2 in Preston?

Yes. We cover all of Preston, including PR1 and PR2, and nearby Blackburn, Darwen and Poulton-le-Fylde. Survey visits are free and arranged at a time that suits you.

Is the water hard in Preston?

Who handles building control for a wet room in Preston?

Building control for Preston is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

What is tanking in a wet room?

Tanking is the waterproof layer under the tiles that stops water reaching the floor and walls. It is usually a liquid or sheet membrane, with sealing tape at every corner, board joint and pipe. Tiles and grout are not waterproof on their own, so the tanking is what actually keeps the water in.