Wet rooms in Kirkby

Postcode districts: L32, L33
Nearby: Maghull, Litherland and Prescot
Guide price: £5,600–£11,250
Typical time on site: 5–10 working days
Water: Soft across most of Merseyside
Survey: Free, at your home

What does a wet room cost in Kirkby?

As a guide, budget £5,600 to £11,250 including VAT for a wet room in Kirkby; your written quote will pin it down. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Compact

£4,200–£6,600

Full tanking, porcelain tiles

Typical

Signature

£6,600–£11,250

4–7 m² room

Large or luxury

£11,250–£17,000

Large-format or stone-effect tiles

Guide prices for Kirkby including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Kirkby

As well as Kirkby itself (L32 and L33), we survey in Maghull, Litherland and Prescot.

Homes in and around Kirkby vary, so we look at the floor, the walls and the water system before we price anything. In a compact Kirkby bathroom, a wet room frees the space a tray and enclosure would take, but expect the whole floor to get wet. If you are planning a wet room in Kirkby for level access, we design the fall and drain so the floor is flush from the doorway.

Supplies across most of Merseyside are soft. If that holds for your street in Kirkby, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Slip-resistant porcelain floor tiles and wall tiling
Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
A pre-formed floor former with a linear or centre drain, or a screed laid to fall

Decisions to make first

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Open or screened

A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.

Rules that apply in England

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

More about wet rooms

Wet rooms in Kirkby: questions

How much should I budget for a wet room in Kirkby?

A wet room in Kirkby usually costs £5,600–£11,250 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the home survey in Kirkby really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover L32 and L33 in Kirkby?

Yes. We cover all of Kirkby, including L32 and L33, and nearby Maghull, Litherland and Prescot. Survey visits are free and arranged at a time that suits you.

Is the water hard in Kirkby?

Can I have a wet room in a flat?

Often, but check your lease first. Freeholder consent is commonly needed, especially where the drainage or the floor changes, and the risk of a leak into the flat below means the tanking and drain connection must be done with care. Sound insulation in the floor matters too.