What does a wet room cost in Norfolk?
Our guide range in Norfolk is £6,400–£12,750 including VAT. Prices in Norfolk run at about 6% above the UK guide, based on East of England labour rates.
Compact
- Full tanking, porcelain tiles
Signature
- 4–7 m² room
Large or luxury
- Large-format or stone-effect tiles
Guide prices for Norfolk including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Norfolk?
Most of Norfolk has very hard water. If your supply in Norwich is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Norwich home has a concrete ground floor, a downstairs wet room may need the screed cut out to set the drain.
What the job includes
- Strip-out, waste removal, a final flow test to the drain and handover
- Slip-resistant porcelain floor tiles and wall tiling
- A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
- A thermostatic shower valve, exposed or concealed, with heads to suit your water system
- Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
- A frameless glass screen fixed to the wall and floor
Decisions to make first
Screen size
A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.
Floor tile
Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.
Underfloor heating
Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.
Former or screed
A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.
Rules that apply in England
A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.
In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.