Wet rooms in Powys

What does a wet room cost in Powys?

Our guide range in Powys is £5,600–£11,250 including VAT. Prices in Powys run at about 7% below the UK guide, based on Wales labour rates.

Compact

£4,200–£6,500

Full tanking, porcelain tiles

Typical

Signature

£6,500–£11,250

4–7 m² room

Large or luxury

£11,250–£16,750

Large-format or stone-effect tiles

Guide prices for Powys including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Powys?

Water across much of Powys is soft. If that holds for your street in Newtown, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are planning a wet room in Newtown for level access, we design the fall and drain so the floor is flush from the doorway.

What the job includes

A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Extractor fan and lighting by a qualified electrician, tested and certified, with underfloor heating if you choose it
A pre-formed floor former with a linear or centre drain, or a screed laid to fall
Floor strengthening or a ply overlay on timber floors so the surface does not flex
Slip-resistant porcelain floor tiles and wall tiling
A frameless glass screen fixed to the wall and floor

Decisions to make first

Underfloor heating

Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Linear or centre drain

A linear drain along one wall lets the floor fall in a single direction, so large tiles can be laid without awkward cuts. A centre drain needs a four-way fall and suits smaller tiles or mosaic.

Screen size

A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.

Rules that apply in Wales

A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.

In Wales, Part H covers new drainage and the Welsh Part F sets similar extract rates. The Welsh Part P makes more electrical work notifiable than in England, so the electrician should notify and certify the work.

Wet rooms in Powys: questions

How much does a wet room cost in Powys?

A wet room in Powys typically costs £5,600–£11,250 including VAT, based on Wales prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Powys do you cover?

We cover the whole of Powys, including Newtown, Ystalyfera, Brecon and Welshpool. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a wet room take?

Most jobs take 5–10 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Powys?

Can you have a wet room on a wooden floor?

Yes. On a timber floor, the former usually sits down between the joists so the finished floor stays level, and the joists may need trimming, strengthening or extra noggins. The floor must be stiff, often with a ply overlay, so it does not flex and crack the tiles or the tanking. We check the joists at the survey before quoting.