Wet rooms in Rutland

What does a wet room cost in Rutland?

Our guide range in Rutland is £5,800–£11,500 including VAT. Prices in Rutland run at about 4% below the UK guide, based on East Midlands labour rates.

Compact

£4,300–£6,700

Floor former and linear or centre drain

Typical

Signature

£6,700–£11,500

Underfloor heating option

Large or luxury

£11,500–£17,250

Full conversion of a larger room

Guide prices for Rutland including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Rutland?

Oakham

Supplies across most of Rutland are hard. If your supply in Oakham is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are planning a wet room in Oakham for level access, we design the fall and drain so the floor is flush from the doorway.

What the job includes

Slip-resistant porcelain floor tiles and wall tiling
A pre-formed floor former with a linear or centre drain, or a screed laid to fall
A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Strip-out, waste removal, a final flow test to the drain and handover
Floor strengthening or a ply overlay on timber floors so the surface does not flex

Decisions to make first

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Former or screed

A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.

Open or screened

A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.

Linear or centre drain

A linear drain along one wall lets the floor fall in a single direction, so large tiles can be laid without awkward cuts. A centre drain needs a four-way fall and suits smaller tiles or mosaic.

Rules that apply in England

A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

Wet rooms in Rutland: questions

How much does a wet room cost in Rutland?

A wet room in Rutland typically costs £5,800–£11,500 including VAT, based on East Midlands prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Rutland do you cover?

We cover the whole of Rutland, including Oakham. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a wet room take?

Most jobs take 5–10 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Rutland?

What is tanking in a wet room?

Tanking is the waterproof layer under the tiles that stops water reaching the floor and walls. It is usually a liquid or sheet membrane, with sealing tape at every corner, board joint and pipe. Tiles and grout are not waterproof on their own, so the tanking is what actually keeps the water in.