- Postcode districts
- CW1, CW2
- Nearby
- Nantwich, Sandbach and Winsford
- Guide price
- £850–£2,400
- Typical time on site
- 1–2 working days
- Water
- Moderately hard across most of Cheshire
- Survey
- Free, at your home
What does a replacement bath cost in Crewe?
Guide price in Crewe: £850–£2,400 including VAT, depending on the room and what you choose. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Crewe including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Crewe
In Crewe we cover CW1 and CW2; we also cover Nantwich, 3.8 miles away, and Sandbach.
Crewe has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. Before a new bath is ordered for a Crewe home, we measure the stairs and landing as well as the opening. If the bath in your Crewe home is the only thing letting the bathroom down, a swap in one or two days avoids a full refit.
Supplies across most of Cheshire are moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
Decisions to make first
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
