Bathroom strip-out in Crewe

Postcode districts: CW1, CW2
Nearby: Nantwich, Sandbach and Winsford
Guide price: £550–£1,700
Typical time on site: 1–2 working days
Water: Moderately hard across most of Cheshire
Survey: Free, at your home

What does a bathroom strip-out cost in Crewe?

In Crewe, a bathroom strip-out typically costs £550–£1,700 including VAT, based on North West England prices. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Strip-out only

£550–£950

Suite, tiles and fittings removed

Strip-out and prep

£950–£1,700

Floor checked and overlaid

Back to brick

£1,400–£2,800

Room ready for a full renovation

Guide prices for Crewe including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Crewe

We work right across Crewe — CW1 and CW2 — and in neighbouring Nantwich and Sandbach.

Crewe has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. Strip-outs in Crewe include the waste going away with a licensed carrier, so nothing is left on the drive or the pavement. For Crewe homes built before 2000, we ask about textured ceilings and old floor tiles before quoting a strip-out.

Water across much of Cheshire is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Wall and floor tiles taken off with as little damage as possible to sound plaster
Waste loaded and taken away by a licensed waste carrier
A note of what was found: floor and wall condition, pipe runs and any damaged timber
Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories

Decisions to make first

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in Crewe: questions

How much does a bathroom strip-out cost in Crewe?

A bathroom strip-out in Crewe usually costs £550–£1,700 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Crewe?

Who handles building control for a bathroom strip-out in Crewe?

Building control for Crewe is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom strip-out take?

Allow 1–2 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Crewe.

How do you get a cast-iron bath out?

A cast-iron bath can weigh well over 100 kg, so it is usually broken up in place with the room protected, unless you want to keep it. Taking one out whole needs several people, a clear route and care on the stairs. Tell us at the survey if you want it saved.