Underfloor heating in Crewe

Postcode districts: CW1, CW2
Nearby: Nantwich, Sandbach and Winsford
Guide price: £650–£2,400
Typical time on site: 1–2 working days (added to a fit)
Water: Moderately hard across most of Cheshire
Survey: Free, at your home

What does bathroom underfloor heating cost in Crewe?

In Crewe, bathroom underfloor heating typically costs £650–£2,400 including VAT, based on North West England prices. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£650–£1,400

Insulation board

Electric, larger room

£1,150–£2,100

Electrician sign-off

Wet system

£1,400–£2,800

Pipes linked to the heating

Guide prices for Crewe including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Crewe

As well as Crewe itself (CW1 and CW2), we survey in Nantwich, Sandbach and Winsford.

Crewe has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. We check door thresholds in Crewe homes at the survey, because underfloor heating and new tiles raise the floor slightly. Where a Crewe home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Supplies across most of Cheshire are moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
A floor sensor set between the heating runs and wired back to the thermostat
The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded

Decisions to make first

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Crewe: questions

How much does bathroom underfloor heating cost in Crewe?

Bathroom underfloor heating in Crewe usually costs £650–£2,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the water hard in Crewe?

Who handles building control for bathroom underfloor heating in Crewe?

Building control for Crewe is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does bathroom underfloor heating take?

Allow 1–2 working days (added to a fit) on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Crewe.

Does underfloor heating raise the floor height?

Yes, a little. An electric mat on an insulation board usually adds roughly 10 mm before the adhesive and tile, which matters at the door threshold. Wet systems in low-profile boards add more, and screeded systems more again.