What does a replacement bath cost in County Londonderry?
Our guide range in County Londonderry is £800–£2,200 including VAT. Prices in County Londonderry run at about 12% below the UK guide, based on Northern Ireland labour rates.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for County Londonderry including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Londonderry?
Supplies across most of County Londonderry are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are in Derry and considering a freestanding bath, the survey includes a check of the floor and joists before you choose.
What the job includes
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
Decisions to make first
Bath panel
Acrylic panels are cheap and easy to clean; wood-effect panels match fitted furniture; a tiled panel on a frame looks built-in but needs an access hatch for the waste.
Taps or filler
Deck taps on the rim are the simplest swap. Wall-mounted taps or a bath filler look cleaner but mean opening the wall, and an overflow filler hides the spout altogether.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in Northern Ireland
Replacing a bath in an existing bathroom does not need planning permission, and a straight swap is not normally building regulations work. New taps or a filler must meet the water fittings rules where you live, including backflow protection. If the new bath is much heavier than the old one, such as a cast-iron or stone resin freestanding bath, the floor needs checking, and strengthening joists is structural work that may need building control approval.
In Northern Ireland, the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 apply to the new taps or filler. Building control is involved only if the floor structure or drainage is altered.