- Postcode districts
- WN7
- Nearby
- Atherton, Tyldesley and Golborne
- Guide price
- £850–£2,400
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does a replacement bath cost in Leigh?
Our guide price for a replacement bath in Leigh is £850–£2,400 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Old bath removed and disposed of
Shower bath
- Bath screen and shower
Freestanding bath
- Floor reinforcement check
Guide prices for Leigh including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Leigh
We work right across Leigh — WN7 — and in neighbouring Atherton and Tyldesley.
Homes in and around Leigh vary, so we look at the floor, the walls and the water system before we price anything. Before a new bath is ordered for a Leigh home, we measure the stairs and landing as well as the opening. Landlords with properties in Leigh can usually have a bath replaced between tenancies in one to two working days.
Most of Greater Manchester is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
Decisions to make first
Bath panel
Acrylic panels are cheap and easy to clean; wood-effect panels match fitted furniture; a tiled panel on a frame looks built-in but needs an access hatch for the waste.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.

