- Postcode districts
- WN1, WN2, WN3
- Nearby
- Wigan, Westhoughton and Leigh
- Guide price
- £850–£2,400
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does a replacement bath cost in Hindley?
For Hindley, our guide range for a replacement bath is £850 to £2,400 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Hindley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hindley
We cover every part of Hindley, including WN1, WN2 and WN3, and nearby Wigan (2.3 miles) and Westhoughton (2.6 miles).
Homes in and around Hindley vary, so we look at the floor, the walls and the water system before we price anything. Landlords with properties in Hindley can usually have a bath replaced between tenancies in one to two working days. If you are in Hindley and considering a freestanding bath, the survey includes a check of the floor and joists before you choose.
Supplies across most of Greater Manchester are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
Decisions to make first
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.

