- Postcode districts
- WN1, WN2, WN3
- Nearby
- Wigan, Westhoughton and Leigh
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does a new shower cost in Hindley?
For Hindley, our guide range for a new shower is £400 to £3,300 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Hindley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hindley
We cover every part of Hindley, including WN1, WN2 and WN3, and nearby Wigan (2.3 miles) and Westhoughton (2.6 miles).
Homes in and around Hindley vary, so we look at the floor, the walls and the water system before we price anything. We test pressure and flow at Hindley surveys before recommending a shower, so you know how it will perform before you buy. For Hindley homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Most of Greater Manchester is supplied with soft water. If that holds for your street in Hindley, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Electrical connection by a qualified electrician, tested and certified
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
