- Postcode districts
- M27, M28, M30
- Nearby
- Eccles, Walkden and Salford
- Guide price
- £850–£2,400
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does a replacement bath cost in Swinton?
Guide price in Swinton: £850–£2,400 including VAT, depending on the room and what you choose. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Silicone and tile repairs
Shower bath
- P or L-shaped shower bath
Freestanding bath
- Floor or wall-mounted filler
Guide prices for Swinton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Swinton
We work right across Swinton — M27, M28 and M30 — and in neighbouring Eccles and Walkden.
Being a smaller town does not change how we work in Swinton: free survey, written quote, one team. If the bath in your Swinton home is the only thing letting the bathroom down, a swap in one or two days avoids a full refit. Before a new bath is ordered for a Swinton home, we measure the stairs and landing as well as the opening.
Supplies across most of Greater Manchester are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
Decisions to make first
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
