- Postcode districts
- CH42, CH62, CH63
- Nearby
- Birkenhead, Heswall and Liverpool
- Guide price
- £850–£2,400
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does a replacement bath cost in Bebington?
As a guide, budget £850 to £2,400 including VAT for a replacement bath in Bebington; your written quote will pin it down. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Bebington including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bebington
We cover every part of Bebington, including CH42, CH62 and CH63, and nearby Birkenhead (3 miles) and Heswall (3.6 miles).
In Bebington, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. Landlords with properties in Bebington can usually have a bath replaced between tenancies in one to two working days. If you are in Bebington and considering a freestanding bath, the survey includes a check of the floor and joists before you choose.
Most of Merseyside is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
- Tile repairs or re-tiling around the bath, and a fixed screen where there is a shower over it
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
Decisions to make first
Shower bath
A P-shaped or L-shaped bath is wider at the shower end, giving room to stand and space for a fixed screen instead of a curtain.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
