- Postcode districts
- S25
- Nearby
- Maltby, Worksop and Rotherham
- Guide price
- £850–£2,300
- Typical time on site
- 1–2 working days
- Water
- Moderately hard across most of South Yorkshire
- Survey
- Free, at your home
What does a replacement bath cost in Dinnington?
As a guide, budget £850 to £2,300 including VAT for a replacement bath in Dinnington; your written quote will pin it down. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Dinnington including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Dinnington
We work right across Dinnington — S25 — and in neighbouring Maltby and Worksop.
Dinnington gets the same process as anywhere else: a free survey at your home and a written, itemised quote. Landlords with properties in Dinnington can usually have a bath replaced between tenancies in one to two working days. Survey visits in Dinnington cover the bath, the tiles around it and the waste route, so the quote reflects your bathroom rather than a standard job.
Water across much of South Yorkshire is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Leak testing at the waste, overflow and taps, taking the old bath away and a final clean
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
Decisions to make first
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
