- Postcode districts
- NE11, NE16, NE21
- Nearby
- Blaydon-on-Tyne, Newcastle upon Tyne and Gateshead
- Guide price
- £800–£2,200
- Typical time on site
- 1–2 working days
- Water
- Soft across most of Tyne and Wear
- Survey
- Free, at your home
What does a replacement bath cost in Whickham?
Our guide price for a replacement bath in Whickham is £800–£2,200 including VAT. We adjust the national guide for North East England, where prices are typically about 10% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Whickham including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Whickham
As well as Whickham itself (NE11, NE16 and NE21), we survey in Blaydon-on-Tyne, Newcastle upon Tyne and Gateshead.
Whickham gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For Whickham homes with a shower over the bath, a shower bath and fixed screen keeps the floor drier than a curtain. Before a new bath is ordered for a Whickham home, we measure the stairs and landing as well as the opening.
Most of Tyne and Wear is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
Decisions to make first
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
