Shower installation in Whickham

Postcode districts: NE11, NE16, NE21
Nearby: Blaydon-on-Tyne, Newcastle upon Tyne and Gateshead
Guide price: £400–£3,200
Typical time on site: half a day to 3 days
Water: Soft across most of Tyne and Wear
Survey: Free, at your home

What does a new shower cost in Whickham?

Guide price in Whickham: £400–£3,200 including VAT, depending on the room and what you choose. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£900

Existing supply and position

Typical

New shower over bath

£700–£1,600

Tiling the bath surround

New shower with enclosure

£1,350–£3,200

Tray, enclosure and valve

Guide prices for Whickham including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Whickham

In Whickham we cover NE11, NE16 and NE21; we also cover Blaydon-on-Tyne, 2 miles away, and Newcastle upon Tyne.

Whickham gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We test pressure and flow at Whickham surveys before recommending a shower, so you know how it will perform before you buy. If the shower in your Whickham home swings between hot and cold, a thermostatic valve is usually the fix.

Water across much of Tyne and Wear is soft. If that holds for your street in Whickham, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
A bath screen, tray or enclosure where the shower is new
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Electrical connection by a qualified electrician, tested and certified

Decisions to make first

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Head and handset

A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Whickham: questions

How much does a new shower cost in Whickham?

A new shower in Whickham usually costs £400–£3,200 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover NE11 in Whickham?

Yes. We cover all of Whickham, including NE11, NE16 and NE21, and nearby Blaydon-on-Tyne, Newcastle upon Tyne and Gateshead. Survey visits are free and arranged at a time that suits you.

Is the water hard in Whickham?

Who handles building control for a new shower in Whickham?

Building control for Whickham is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Why does my shower keep going hot and cold?

Usually because it is a manual mixer without thermostatic control, so when someone runs a tap or flushes a toilet, the balance of hot and cold changes. A thermostatic valve corrects for this automatically. On an electric shower, scale build-up or a failing part can cause the same symptom.