- Postcode districts
- HD2, HD6, HX5
- Nearby
- Elland, Halifax and Cleckheaton
- Guide price
- £850–£2,300
- Typical time on site
- 1–2 working days
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does a replacement bath cost in Brighouse?
Guide price in Brighouse: £850–£2,300 including VAT, depending on the room and what you choose. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- Old bath removed and disposed of
Shower bath
- Bath screen and shower
Freestanding bath
- Floor reinforcement check
Guide prices for Brighouse including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Brighouse
We cover every part of Brighouse, including HD2, HD6 and HX5, and nearby Elland (2.6 miles) and Halifax (2.8 miles).
Homes in and around Brighouse vary, so we look at the floor, the walls and the water system before we price anything. Landlords with properties in Brighouse can usually have a bath replaced between tenancies in one to two working days. If you are in Brighouse and considering a freestanding bath, the survey includes a check of the floor and joists before you choose.
Most of West Yorkshire is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply of the new bath, taps or filler, waste and overflow, and bath panel
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
- Removal of the old bath, including breaking up a cast-iron bath in place where it will not come out whole
Decisions to make first
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Acrylic or steel
Acrylic is warm to the touch, light and the usual choice; thicker, reinforced acrylic flexes less. Enamelled steel is rigid and hard-wearing but feels colder, and needs sound-deadening pads to stop it drumming.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.

