- Postcode districts
- HD2, HD6, HX5
- Nearby
- Elland, Halifax and Cleckheaton
- Guide price
- £350–£1,100
- Typical time on site
- half a day to 2 days
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Brighouse?
As a guide, budget £350 to £1,100 including VAT for new bathroom lighting in Brighouse; your written quote will pin it down. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Brighouse including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Brighouse
As well as Brighouse itself (HD2, HD6 and HX5), we survey in Elland, Halifax and Cleckheaton.
In Brighouse, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. We survey Brighouse bathrooms before quoting lighting, so the zones are measured from your actual bath and shower. If you are refitting a windowless bathroom in Brighouse, the lighting is planned with the extractor fan so the two work together.
Most of West Yorkshire is supplied with soft water. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- Testing and an electrical certificate for the work on completion
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
Decisions to make first
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

