Bathroom lighting in West Yorkshire

What does new bathroom lighting cost in West Yorkshire?

Our guide range in West Yorkshire is £350–£1,100 including VAT. Prices in West Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.

Guide prices for West Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in West Yorkshire?

• Leeds
• Bradford
• Huddersfield
• Wakefield
• Halifax
• Dewsbury
• Morley
• Keighley
• Castleford
• Pontefract
• Batley
• Yeadon
• Brighouse
• Shipley
• Cleckheaton
• Pudsey
• Lofthouse
• Ossett
• Guiseley
• Liversedge
• Horsforth
• South Elmsall
• Mirfield
• Heckmondwike
• Bingley
• Kippax
• Baildon
• Elland

Supplies across most of West Yorkshire are soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. Bathroom lighting in Leeds is wired to BS 7671 with RCD protection, tested, and certified when it is finished.

What the job includes

• A shaver supply unit where wanted, positioned away from direct spray
• RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
• Testing and an electrical certificate for the work on completion
• A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
• Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
• IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower

Decisions to make first

Switching

A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.

Feature lighting

LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.

Downlight positions

Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.

Colour temperature

Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.

Rules that apply in England

BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.

In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.