- Postcode districts
- SL1, SL2, SL3
- Nearby
- Windsor, Maidenhead and Gerrards Cross
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of Berkshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Slough?
Guide price in Slough: £400–£1,350 including VAT, depending on the room and what you choose. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Testing and certificate
Layered
- Downlights plus mirror or vanity light
Feature
- Illuminated mirror cabinet
Guide prices for Slough including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Slough
We cover every part of Slough, including SL1, SL2 and SL3, and nearby Windsor (1.8 miles) and Maidenhead (5.4 miles).
Across a large town like Slough, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. If you are refitting a windowless bathroom in Slough, the lighting is planned with the extractor fan so the two work together. For Slough homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.
Most of Berkshire has hard water. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Testing and an electrical certificate for the work on completion
- Cable runs to each fitting, from the loft above or through the ceiling
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
Decisions to make first
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

