What does new bathroom lighting cost in Berkshire?
Our guide range in Berkshire is £400–£1,350 including VAT. Prices in Berkshire run at about 12% above the UK guide, based on South East England labour rates.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Berkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Berkshire?
Most of Berkshire has hard water. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. For Reading homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.
What the job includes
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- A shaver supply unit where wanted, positioned away from direct spray
- Cable runs to each fitting, from the loft above or through the ceiling
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- Testing and an electrical certificate for the work on completion
Decisions to make first
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Mirror lighting
An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Rules that apply in England
BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.