Bathroom lighting in East Sussex

What does new bathroom lighting cost in East Sussex?

Our guide range in East Sussex is £400–£1,350 including VAT. Prices in East Sussex run at about 12% above the UK guide, based on South East England labour rates.

Typical

Essential

£350–£650

Switching and RCD protection

Layered

£650–£1,350

Separate switching

Feature

£1,100–£2,200

Niche and plinth LED strips

Guide prices for East Sussex including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in East Sussex?

Water across much of East Sussex is hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Brighton bathroom has one central light, adding downlights and a mirror light is usually the change you notice most.

What the job includes

A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
A shaver supply unit where wanted, positioned away from direct spray
A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Cable runs to each fitting, from the loft above or through the ceiling
IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
Testing and an electrical certificate for the work on completion

Decisions to make first

Integrated or replaceable LED

Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.

Colour temperature

Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.

Switching

A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.

Mirror lighting

An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.

Rules that apply in England

BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.

In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

Bathroom lighting in East Sussex: questions

How much does new bathroom lighting cost in East Sussex?

New bathroom lighting in East Sussex typically costs £400–£1,350 including VAT, based on South East England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in East Sussex do you cover?

We cover the whole of East Sussex, including Brighton, Eastbourne, Hastings, Hove, Bexhill-on-Sea, Hailsham, Seaford and Rottingdean. If your town is not listed, we still cover it — get in touch with your postcode.

How long does new bathroom lighting take?

Most jobs take half a day to 2 days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in East Sussex?

Can you have a normal plug socket in a bathroom?

Only if it is at least 3 m from the edge of zone 1, which rules it out in most UK bathrooms. The exception is a shaver supply unit, which has an isolating transformer and is designed for bathrooms. It should sit away from direct spray.