- Postcode districts
- BN25
- Nearby
- Peacehaven, Rottingdean and Eastbourne
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of East Sussex
- Survey
- Free, at your home
What does new bathroom lighting cost in Seaford?
For Seaford, our guide range for new bathroom lighting is £400 to £1,350 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Seaford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Seaford
In Seaford we cover BN25; we also cover Peacehaven, 5 miles away, and Rottingdean.
Being a smaller town does not change how we work in Seaford: free survey, written quote, one team. We survey Seaford bathrooms before quoting lighting, so the zones are measured from your actual bath and shower. Bathroom lighting in Seaford is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Supplies across most of East Sussex are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- Testing and an electrical certificate for the work on completion
Decisions to make first
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Integrated or replaceable LED
Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

