- Postcode districts
- BN7
- Nearby
- Rottingdean, Peacehaven and Brighton
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of East Sussex
- Survey
- Free, at your home
What does new bathroom lighting cost in Lewes?
Guide price in Lewes: £400–£1,350 including VAT, depending on the room and what you choose. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Lewes including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Lewes
As well as Lewes itself (BN7), we survey in Rottingdean, Peacehaven and Brighton.
Lewes gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are refitting a windowless bathroom in Lewes, the lighting is planned with the extractor fan so the two work together. Bathroom lighting in Lewes is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Water across much of East Sussex is hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shaver supply unit where wanted, positioned away from direct spray
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- Cable runs to each fitting, from the loft above or through the ceiling
Decisions to make first
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

