- Postcode districts
- BN10
- Nearby
- Rottingdean, Seaford and Lewes
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of East Sussex
- Survey
- Free, at your home
What does new bathroom lighting cost in Peacehaven?
For Peacehaven, our guide range for new bathroom lighting is £400 to £1,350 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Peacehaven including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Peacehaven
In Peacehaven we cover BN10; we also cover Rottingdean, 2.6 miles away, and Seaford.
Being a smaller town does not change how we work in Peacehaven: free survey, written quote, one team. Landlords in Peacehaven get an electrical certificate for new bathroom lighting, which belongs with the property's safety records. Bathroom lighting in Peacehaven is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Supplies across most of East Sussex are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shaver supply unit where wanted, positioned away from direct spray
- Cable runs to each fitting, from the loft above or through the ceiling
- Testing and an electrical certificate for the work on completion
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
Decisions to make first
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

