What does new bathroom lighting cost on the Isle of Wight?
Our guide range on the Isle of Wight is £400–£1,350 including VAT. Prices on the Isle of Wight run at about 12% above the UK guide, based on South East England labour rates. Travel and delivery to islands and remote areas are priced on your quote.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Isle of Wight including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover on the Isle of Wight?
Water across much of the Isle of Wight is hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are refitting a windowless bathroom in Newport, the lighting is planned with the extractor fan so the two work together.
What the job includes
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- Cable runs to each fitting, from the loft above or through the ceiling
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- A shaver supply unit where wanted, positioned away from direct spray
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- Testing and an electrical certificate for the work on completion
Decisions to make first
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Rules that apply in England
BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.