Bathroom lighting in Hampshire

What does new bathroom lighting cost in Hampshire?

Our guide range in Hampshire is £400–£1,350 including VAT. Prices in Hampshire run at about 12% above the UK guide, based on South East England labour rates.

Typical

Essential

£350–£650

IP-rated LED downlights

Layered

£650–£1,350

Shaver socket

Feature

£1,100–£2,200

Dimming and sensors

Guide prices for Hampshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Hampshire?

Most of Hampshire has hard water. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are refitting a windowless bathroom in Southampton, the lighting is planned with the extractor fan so the two work together.

What the job includes

Testing and an electrical certificate for the work on completion
A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
Cable runs to each fitting, from the loft above or through the ceiling
A shaver supply unit where wanted, positioned away from direct spray
A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights

Decisions to make first

Switching

A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.

Mirror lighting

An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.

Downlight positions

Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.

Feature lighting

LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.

Rules that apply in England

BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.

In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

Bathroom lighting in Hampshire: questions

How much does new bathroom lighting cost in Hampshire?

New bathroom lighting in Hampshire typically costs £400–£1,350 including VAT, based on South East England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Hampshire do you cover?

We cover the whole of Hampshire, including Southampton, Portsmouth, Basingstoke, Gosport, Waterlooville, Farnborough, Eastleigh and Winchester. If your town is not listed, we still cover it — get in touch with your postcode.

How long does new bathroom lighting take?

Most jobs take half a day to 2 days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Hampshire?

What IP rating do bathroom lights need?

It depends on the zone. Lights inside the bath or shower tray (zone 0) need IPX7; above the bath or shower up to 2.25 m (zone 1) they need at least IPX4, or IPX5 where water jets are used; within 0.6 m of that (zone 2) IPX4 is recommended. Many electricians fit IP65 downlights over a shower whatever the ceiling height. See our bathroom zones guide.