- Postcode districts
- SO45
- Nearby
- Southampton, Totton and Hedge End
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of Hampshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Hythe?
As a guide, budget £400 to £1,350 including VAT for new bathroom lighting in Hythe; your written quote will pin it down. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Hythe including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hythe
We cover every part of Hythe, including SO45, and nearby Southampton (3 miles) and Totton (5.6 miles).
Hythe gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are refitting a windowless bathroom in Hythe, the lighting is planned with the extractor fan so the two work together. For Hythe homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.
Supplies across most of Hampshire are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- A shaver supply unit where wanted, positioned away from direct spray
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
Decisions to make first
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

