What does new bathroom lighting cost in County Fermanagh?
Our guide range in County Fermanagh is £300–£1,050 including VAT. Prices in County Fermanagh run at about 12% below the UK guide, based on Northern Ireland labour rates.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for County Fermanagh including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Fermanagh?
Water across much of County Fermanagh is soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are refitting a windowless bathroom in Enniskillen, the lighting is planned with the extractor fan so the two work together.
What the job includes
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- A shaver supply unit where wanted, positioned away from direct spray
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
Decisions to make first
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Rules that apply in Northern Ireland
BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.
Northern Ireland has no Part P. Lighting work should follow BS 7671 as good practice, with the circuit tested and a certificate issued.