- Postcode districts
- NW2, NW6, NW11
- Nearby
- Kilburn, Willesden and Finchley
- Guide price
- £450–£1,500
- Typical time on site
- half a day to 2 days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does new bathroom lighting cost in Cricklewood?
As a guide, budget £450 to £1,500 including VAT for new bathroom lighting in Cricklewood; your written quote will pin it down. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Cricklewood including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Cricklewood
We work right across Cricklewood — NW2, NW6 and NW11 — and in neighbouring Kilburn and Willesden.
London homes in Cricklewood often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. Bathroom lighting in Cricklewood is wired to BS 7671 with RCD protection, tested, and certified when it is finished. If you are refitting a windowless bathroom in Cricklewood, the lighting is planned with the extractor fan so the two work together.
Supplies across most of Greater London are very hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Cable runs to each fitting, from the loft above or through the ceiling
- Testing and an electrical certificate for the work on completion
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- A shaver supply unit where wanted, positioned away from direct spray
Decisions to make first
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Integrated or replaceable LED
Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

