- Postcode districts
- LE1, LE3, LE4, LE5
- Nearby
- Wigston Magna, Earl Shilton and Loughborough
- Guide price
- £350–£1,150
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of Leicestershire
- Survey
- Free, at your home
What does new bathroom lighting cost in Leicester?
For Leicester, our guide range for new bathroom lighting is £350 to £1,150 including VAT. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Leicester including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Leicester
In Leicester we cover LE1, LE3, LE4 and 1 more postcode districts; we also cover Wigston Magna, 4.3 miles away, and Earl Shilton.
In a city the size of Leicester, parking and access for a skip are worth sorting before the start date — we will ask at the survey. If you are refitting a windowless bathroom in Leicester, the lighting is planned with the extractor fan so the two work together. Bathroom lighting in Leicester is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Water across much of Leicestershire is hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Decisions to make first
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

