- Postcode districts
- L20, L21, L22, L30, L37, L38 + 2 more
- Nearby
- Formby, Lytham St Annes and Ormskirk
- Guide price
- £350–£1,150
- Typical time on site
- half a day to 2 days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does new bathroom lighting cost in Southport?
As a guide, budget £350 to £1,150 including VAT for new bathroom lighting in Southport; your written quote will pin it down. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Testing and certificate
Layered
- Downlights plus mirror or vanity light
Feature
- Illuminated mirror cabinet
Guide prices for Southport including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Southport
We work right across Southport — L20, L21, L22 and 5 more postcode districts — and in neighbouring Formby and Lytham St Annes.
Across a large town like Southport, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. For Southport homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in. We survey Southport bathrooms before quoting lighting, so the zones are measured from your actual bath and shower.
Water across much of Merseyside is soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
Decisions to make first
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

