- Postcode districts
- YO11, YO12
- Nearby
- Guisborough, Redcar and York
- Guide price
- £350–£1,100
- Typical time on site
- half a day to 2 days
- Water
- Moderately hard across most of North Yorkshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Scarborough?
Our guide price for new bathroom lighting in Scarborough is £350–£1,100 including VAT. Labour costs in Yorkshire and the Humber put local prices at about 7% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for Scarborough including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Scarborough
In Scarborough we cover YO11 and YO12; we also cover Guisborough, 31.6 miles away, and Redcar.
In Scarborough, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are refitting a windowless bathroom in Scarborough, the lighting is planned with the extractor fan so the two work together. For Scarborough homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.
Water across much of North Yorkshire is moderately hard. Easy-clean glass and good-quality brassware are money well spent. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- A shaver supply unit where wanted, positioned away from direct spray
- Testing and an electrical certificate for the work on completion
- Cable runs to each fitting, from the loft above or through the ceiling
Decisions to make first
Integrated or replaceable LED
Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

