- Postcode districts
- KT7, KT8, TW12
- Nearby
- West Molesey, Esher and Surbiton
- Guide price
- £400–£1,350
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of Surrey
- Survey
- Free, at your home
What does new bathroom lighting cost in East Molesey?
In East Molesey, new bathroom lighting typically costs £400–£1,350 including VAT, based on South East England prices. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Switching and RCD protection
Layered
- Separate switching
Feature
- Niche and plinth LED strips
Guide prices for East Molesey including VAT. Your itemised written quote after the free survey is the price that counts.
Working in East Molesey
As well as East Molesey itself (KT7, KT8 and TW12), we survey in West Molesey, Esher and Surbiton.
East Molesey gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your East Molesey bathroom has one central light, adding downlights and a mirror light is usually the change you notice most. If you are refitting a windowless bathroom in East Molesey, the lighting is planned with the extractor fan so the two work together.
Supplies across most of Surrey are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shaver supply unit where wanted, positioned away from direct spray
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- Cable runs to each fitting, from the loft above or through the ceiling
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Decisions to make first
Downlight positions
Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

