Bathroom plumbing in Armagh

Postcode districts: BT61
Nearby: Portadown, Dungannon and Craigavon
Guide price: £550–£3,500
Typical time on site: 1–5 working days
Water: Soft across most of County Armagh
Survey: Free, at your home

What does bathroom plumbing work cost in Armagh?

Guide price in Armagh: £550–£3,500 including VAT, depending on the room and what you choose. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Like-for-like

£550–£1,300

Isolation valves, new tails

Partial re-route

£1,050–£2,200

Waste re-routed

New layout

£1,750–£3,500

WC moved on the soil stack

Guide prices for Armagh including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Armagh

In Armagh we cover BT61; we also cover Portadown, 10.3 miles away, and Dungannon.

Being a smaller town does not change how we work in Armagh: free survey, written quote, one team. For Armagh homes on a combi boiler, we measure the flow rate at the bathroom before you choose a shower valve. Plumbing surveys in Armagh include a look at the existing pipework for lead, corrosion or poor support before we quote.

Water across much of County Armagh is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Shower pumps on gravity systems, and macerators or pumped wastes where gravity drainage cannot reach
Basin, bath and shower wastes sized and laid to a steady fall, with traps that hold their water seal
New hot and cold pipework in copper or plastic, properly clipped, and insulated where it runs through cold spaces
Isolation valves on every fitting, so taps, cisterns and valves can be serviced without draining the system

Decisions to make first

Shower supply

Combi boilers and unvented cylinders give mains pressure. A gravity system with a cold tank may need a pump, but a pump must never be connected to the mains.

Pipe routes

Drilling through the middle of joists, rather than notching the tops, keeps the floor strong. Routes are planned with the joist direction in mind.

Rules that apply in Northern Ireland

In Northern Ireland, the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 apply to new fittings. New drainage and connections are a matter for building control.

More about bathroom plumbing

Bathroom plumbing in Armagh: questions

What is the price of bathroom plumbing work in Armagh?

Bathroom plumbing work in Armagh usually costs £550–£3,500 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Armagh?

Does bathroom plumbing work in Armagh need building control approval?

Building control in Armagh is run by the local district council. Where approval is needed, for example for new drainage, we tell you at the survey and handle it as part of the job.

How long does bathroom plumbing work take?

Allow 1–5 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Armagh.

Why is my shower pressure low?

Low shower pressure usually comes from the water system rather than the shower itself. Gravity showers depend on the height of the cold tank above the shower head; combi showers are limited by the boiler's flow rate and the mains pressure; and any system can be throttled by a part-closed valve, a scaled-up shower head or a long run of narrow pipe. We measure pressure and flow at the survey to find which.