Underfloor heating in Armagh

Postcode districts: BT61
Nearby: Portadown, Dungannon and Craigavon
Guide price: £600–£2,200
Typical time on site: 1–2 working days (added to a fit)
Water: Soft across most of County Armagh
Survey: Free, at your home

What does bathroom underfloor heating cost in Armagh?

Guide price in Armagh: £600–£2,200 including VAT, depending on the room and what you choose. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£600–£1,300

Thermostat and RCD-protected supply

Electric, larger room

£1,050–£1,950

Whole floor coverage

Wet system

£1,300–£2,600

Manifold or single-zone kit

Guide prices for Armagh including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Armagh

In Armagh we cover BT61; we also cover Portadown, 10.3 miles away, and Dungannon.

Armagh gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For Armagh homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit. Whether your Armagh bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room.

Water across much of County Armagh is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit

Decisions to make first

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Rules that apply in Northern Ireland

Northern Ireland has no Part P, but the heating circuit should be designed, tested and certified to BS 7671, with RCD protection. Building control is not usually involved unless drainage or structural work is being done alongside it.

More about underfloor heating

Underfloor heating in Armagh: questions

What is the price of bathroom underfloor heating in Armagh?

Bathroom underfloor heating in Armagh usually costs £600–£2,200 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the water hard in Armagh?

Does bathroom underfloor heating in Armagh need building control approval?

Building control in Armagh is run by the local district council. Where approval is needed, for example for new drainage, we tell you at the survey and handle it as part of the job.

How long does bathroom underfloor heating take?

Allow 1–2 working days (added to a fit) on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Armagh.

Does underfloor heating raise the floor height?

Yes, a little. An electric mat on an insulation board usually adds roughly 10 mm before the adhesive and tile, which matters at the door threshold. Wet systems in low-profile boards add more, and screeded systems more again.