Bathroom tiling in Derby

Postcode districts: DE1, DE21, DE22, DE23, DE24
Nearby: Belper, Ilkeston and Heanor
Guide price: £45–£85 per m²
Typical time on site: 2–4 working days
Water: Moderately hard across most of Derbyshire
Survey: Free, at your home

What does bathroom tiling cost in Derby?

For Derby, our guide range for bathroom tiling is £45 to £85 per m² including VAT. Labour costs in East Midlands put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Ceramic

£45–£60 per m²

Grout and trims

Typical

Porcelain

£60–£85 per m²

Porcelain walls and floor

Large-format or stone

£80–£125 per m²

Mitred edges, niches

Guide prices for Derby including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Derby

As well as Derby itself (DE1, DE21, DE22 and 2 more postcode districts), we survey in Belper, Ilkeston and Heanor.

Derby is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. Whatever the age of your Derby home, large-format tiles need flat walls, so the survey checks how much preparation they will take. Tiling quotes in Derby list the tile, the area and the preparation separately, so you can compare like for like.

Most of Derbyshire has moderately hard water. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Fixing with an adhesive suited to the tile and the surface, with levelling clips for large tiles
Measuring wall and floor areas and working out quantities with an allowance for cuts
Checking walls for flatness and strength, and boarding with cement-based backer board where needed
Grouting, trims or mitred edges, and silicone at internal corners, the bath and the tray

Decisions to make first

Natural stone

Marble, limestone and travertine need sealing and gentle cleaners, and can mark. Stone-effect porcelain gives a similar look without the upkeep.

Grout

Cement-based grout is standard. Epoxy grout resists stains and mould better and suits showers, but takes longer to apply and costs more.

Rules that apply in England

In England, tiling itself is not building regulations work. If it is part of forming a level shower floor with new drainage, that drainage can be Part H work, and any new electrics are covered by Part P.

More about bathroom tiling

Bathroom tiling in Derby: questions

How much should I budget for bathroom tiling in Derby?

Bathroom tiling in Derby usually costs £45–£85 per m² including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover DE1 in Derby?

Yes. We cover all of Derby, including DE1, DE21, DE22, DE23 and 1 more postcode districts, and nearby Belper, Ilkeston and Heanor. Survey visits are free and arranged at a time that suits you.

Is the water hard in Derby?

Who handles building control for bathroom tiling in Derby?

Building control for Derby is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can you tile over existing bathroom tiles?

Sometimes, but it is rarely the right choice. Tiling over tiles adds weight, brings the wall forward so trims and fittings no longer line up, and hides any loose tiles or water damage underneath. It is only worth considering where the old tiles are firmly bonded and the wall can take the extra load.