- Postcode districts
- DE1, DE21, DE22, DE23, DE24
- Nearby
- Belper, Ilkeston and Heanor
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Moderately hard across most of Derbyshire
- Survey
- Free, at your home
What does a new shower cost in Derby?
Our guide price for a new shower in Derby is £450–£3,400 including VAT. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Derby including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Derby
As well as Derby itself (DE1, DE21, DE22 and 2 more postcode districts), we survey in Belper, Ilkeston and Heanor.
Derby is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. If your Derby bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If the shower in your Derby home swings between hot and cold, a thermostatic valve is usually the fix.
Supplies across most of Derbyshire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Derby. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- A check of your hot-water system, water pressure and flow rate
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
