Shower installation in Ilkeston

Postcode districts: DE7, NG10
Nearby: Eastwood, Heanor and Long Eaton
Guide price: £450–£3,400
Typical time on site: half a day to 3 days
Water: Moderately hard across most of Derbyshire
Survey: Free, at your home

What does a new shower cost in Ilkeston?

For Ilkeston, our guide range for a new shower is £450 to £3,400 including VAT. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£450–£950

Test and handover

Typical

New shower over bath

£750–£1,750

Thermostatic bar shower and riser

New shower with enclosure

£1,450–£3,400

Pipework and waste

Guide prices for Ilkeston including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Ilkeston

As well as Ilkeston itself (DE7 and NG10), we survey in Eastwood, Heanor and Long Eaton.

Homes in and around Ilkeston vary, so we look at the floor, the walls and the water system before we price anything. If your Ilkeston bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If the shower in your Ilkeston home swings between hot and cold, a thermostatic valve is usually the fix.

Supplies across most of Derbyshire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Ilkeston. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
A bath screen, tray or enclosure where the shower is new
Electrical connection by a qualified electrician, tested and certified

Decisions to make first

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Digital shower

A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Ilkeston: questions

How much should I budget for a new shower in Ilkeston?

A new shower in Ilkeston usually costs £450–£3,400 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the home survey in Ilkeston really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover DE7 and NG10 in Ilkeston?

Yes. We cover all of Ilkeston, including DE7 and NG10, and nearby Eastwood, Heanor and Long Eaton. Survey visits are free and arranged at a time that suits you.

Is the water hard in Ilkeston?

Why does my shower keep going hot and cold?

Usually because it is a manual mixer without thermostatic control, so when someone runs a tap or flushes a toilet, the balance of hot and cold changes. A thermostatic valve corrects for this automatically. On an electric shower, scale build-up or a failing part can cause the same symptom.