- Postcode districts
- NG5, NG6, NG15
- Nearby
- Arnold, Eastwood and Kirkby in Ashfield
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Nottinghamshire
- Survey
- Free, at your home
What does a new shower cost in Hucknall?
In Hucknall, a new shower typically costs £450–£3,400 including VAT, based on East Midlands prices. We adjust the national guide for East Midlands, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Hucknall including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hucknall
We work right across Hucknall — NG5, NG6 and NG15 — and in neighbouring Arnold and Eastwood.
In Hucknall, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. We test pressure and flow at Hucknall surveys before recommending a shower, so you know how it will perform before you buy. For Hucknall homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Supplies across most of Nottinghamshire are hard. If your supply in Hucknall is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
