Shower installation in Eastwood

Postcode districts: DE7, DE75, NG16
Nearby: Ilkeston, Heanor and Ripley
Guide price: £450–£3,400
Typical time on site: half a day to 3 days
Water: Hard across most of Nottinghamshire
Survey: Free, at your home

What does a new shower cost in Eastwood?

Guide price in Eastwood: £450–£3,400 including VAT, depending on the room and what you choose. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£450–£950

Test and handover

Typical

New shower over bath

£750–£1,750

Thermostatic bar shower and riser

New shower with enclosure

£1,450–£3,400

Pipework and waste

Guide prices for Eastwood including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Eastwood

We work right across Eastwood — DE7, DE75 and NG16 — and in neighbouring Ilkeston and Heanor.

Eastwood gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If the shower in your Eastwood home swings between hot and cold, a thermostatic valve is usually the fix. If you want a shower in your Eastwood home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.

Water across much of Nottinghamshire is hard. If your supply in Eastwood is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
A bath screen, tray or enclosure where the shower is new
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Electrical connection by a qualified electrician, tested and certified

Decisions to make first

Head and handset

A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Eastwood: questions

What is the price of a new shower in Eastwood?

A new shower in Eastwood usually costs £450–£3,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover DE7 in Eastwood?

Yes. We cover all of Eastwood, including DE7, DE75 and NG16, and nearby Ilkeston, Heanor and Ripley. Survey visits are free and arranged at a time that suits you.

Is the water hard in Eastwood?

Who handles building control for a new shower in Eastwood?

Building control for Eastwood is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can you replace an electric shower with a mixer?

Yes, if your hot-water system can supply it. That means running hot and cold pipes to the shower position and making the old shower circuit safe or reusing it. It is worth doing if you have a combi or unvented cylinder with good flow.